Boards & Add-Ons

Close filters
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Ethernut Alu Box 3
Ethernut alu box 3
The alu box 3 is prepared for mounting Ethernut 3 boards.
€ 27.65
excl. VAT
€ 32.90
incl. 19% VAT
CMI8848 1.0 Rev-B
CMI8848 1.0 rev-B
CMI8848 expands the capability of the Ethernut boards by providing 8 galvanically isolated digital I/O channels, available at pluggable spring-cage terminal blocks. In combination with an Ethernut board, AC and DC loads and states can be...
€ 78.95
excl. VAT
€ 93.95
incl. 19% VAT
SAM7X-EK (AT91SAM7X-EK)
SAM7X-EK (AT91SAM7X-EK)
€ 179.75
excl. VAT
€ 213.90
incl. 19% VAT
eNet-PLC Kit
eNet-PLC Kit
€ 245.80
excl. VAT
€ 292.50
incl. 19% VAT
Ethernut Bulk 5.0
egnite - Ethernut Bulk 5.0
This offer is valid until August 31, 2017: ARM9 development board for advanced Nut/OS or embedded Linux applications with 1 GB NAND Flash and 128 MB SDRAM. An additional 512 Kbyte on-chip Flash allows you to protect your sensitive data...
€ 185.00
€ 166.50
excl. VAT
€ 220.15
€ 198.14
incl. 19% VAT
Ethernut Alu Box 1
Ethernut alu box 1
The alu box 1 is prepared for mounting Ethernut 1 or Ethernut 2 boards. The bottom case has 4 holes for mounting the board and the back plate has 3 cut-outs for the RJ-45, DC and D-Sub connectors. Mounting guide: Start mounting the PCB...
€ 27.65
excl. VAT
€ 32.90
incl. 19% VAT
eNet-sam7X Basic
eNet-sam7X Basic
The eNet-sam7X Basic module is based on Atmel's AT91SAM7X. This easy to use ARM7 board allows a money and time saving integration of Ethernet and USB interfaces into your project, along with a powerful SAM7 microcontroller. Versatile...
€ 100.80
excl. VAT
€ 119.95
incl. 19% VAT
eNet-sam7X Basic Kit
eNet-sam7X Basic Kit
The eNet-sam7X Basic module is based on Atmel's AT91SAM7X. This easy to use ARM7 board allows a money and time saving integration of Ethernet and USB interfaces into your project, along with a powerful SAM7 microcontroller. Versatile...
€ 110.50
excl. VAT
€ 131.50
incl. 19% VAT
proconX | XNUT-100 | egnite Shop
XNUT-100
XNUT-100 is a single board computer with industrialized form-factor, DIN-rail enclosure, Embedded Ethernet and additional RS-232, RS-422 and RS-485 ports. XNUT-100 is based on the AVR ATmega128 CPU. By using the freely available GNU GCC...
€ 194.20
excl. VAT
€ 231.10
incl. 19% VAT
proconx | XNUT-105 | egnite Shop
proconX - XNUT-105
XNUT-105 is a single board computer with industrialized form-factor, DIN-rail enclosure, Embedded Ethernet, CAN and additional RS-232, RS-422 and RS-485 ports. XNUT-105 is based on the AVR AT90CAN128 CPU. By using the freely available...
€ 215.00
excl. VAT
€ 255.85
incl. 19% VAT
Ethernut Starter Kit 2.1
egnite - Ethernut Starter Kit 2.1
Ethernut 2 is a development board for embedded Ethernet applications. The single board computer combines the AVR ATmega128 with a 100 MBit Ethernet interface. The board has 512 Kbytes of RAM and can be programmed in the higher programing...
€ 150.00
excl. VAT
€ 178.50
incl. 19% VAT
Ethernut Bulk 2.1
egnite - Ethernut Bulk 2.1
Ethernut 2 is a development board for embedded Ethernet applications. The single board computer combines the AVR ATmega128 with a 100 MBit Ethernet interface. The board has 512 Kbytes of RAM and can be programmed in the higher programing...
€ 125.00
excl. VAT
€ 148.75
incl. 19% VAT
1 From 2
Viewed