HW group: WLD2 PoE

Ethernet / WiFi water detector with PoE

WLD2 detects smallest amounts of liquid along the entire length of the connected sensor cables. In the event of contact with liquid or an interrupted connection to the sensor cable, the water leakage detector alerts by e-mail, SNMP trap or via the SensDesk cloud. In addition, WLD2 can send a text message and dial a phone number via HW group's external SMS gateway.
The unit supports up to 4 sensor cables. Each sensor cable with a possible total length of 85 metres can be extended up to 185 metres with connecting cables. The monitored area can be divided into zones, making it easier to locate the source of the water damage. In the event of an alarm, a different telephone number is called depending on the zone.
The box-to-box mode enables the relay outputs of other HW group devices such as Poseidon2 or Damocles2 to be activated in the event of an alarm. Power is supplied via a plug-in power supply.

• Ethernet: 10/100 MBit, RJ45
• WLAN: 802.11 b/g/n, 2.4 GHz
• 4 sensor inputs: 2-pin connector plug
• Digital output (virtual)
• Metal housing, dimensions: 65 x 80 x 30 mm (L x W x H)
• Power supply: external plug-in power supply (5V DC) or PoE
• Max. sensor cable length: 85 m
• Max. connection cable length: 100 m
• Integrated web server
• SNMP, SNMP Trap
• E-mail messages
• SMS messages (via SMS gateway)
• SensDesk support

• Water detection under raised floors
• Leaky pipe detection
• Detection of water leaks in drip trays
• Detection of water leaks under air-conditioning outlets

• WLD2
• WLD Sensing Cable A, 2 m
• WLD A Connection Cable, 2 m
• Plug-in power supply, 5 V DC

• WLD2
• WLD Sensing Cable A, 2 m
• WLD A Connection Cable, 2 m
• Plug-in power supply, 5 V DC